Our MX FUEL™ Handheld Core Drill allows you to core with more confidence than ever before. A patented clutch and AUTOSTOP™ technology deliver a safer handheld coring experience. They provide you with maximum control and prevent over-rotation in case the core drilling machine gets bound up. The POWERSTATE™ Brushless Motor delivers you the power to core up to 6" holes in reinforced concrete. REDLINK PLUS™ Intelligence ensures maximum performance and protection from overload, overheating, and over-discharge. An onboard LED level and performance gauge provide you with maximum efficiency while coring. These features, along with the option to wet or dry core make it easier for you to core anywhere.

The TS 420 is so popular, it could possibly be called "the standard" to which other cut-off machines are compared. Users like it because it is compact, lightweight, reliable and proves itself day in and day out, all day long. The TS 420 features all the high-performance features of the TS 410 - including an X2 air filtration system for a clean and smooth-running engine and virtually maintenance-free filters. With the added benefit of a 14" cutting wheel, it will handle cuts up to 4.9 inches in depth. This cut-off machine backs up its larger cutting capacity with a ton of usability features.

The 6955-20 12" Dual-Bevel Sliding Compound Miter Saw offers best in class accuracy, power and ease of use. The Miter Angle Digital Readout provides repeatable accuracy to 0.1°. The Miter Angle Fine Adjust with Detent Override makes it simple to dial-in precise miter angles. Dual Integral Jobsite Lights fully illuminate the work piece and cut line from either side of the blade. The powerful 15.0 Amp, 3.3 Max HP Direct Drive Motor provides increased power for high performance cutting in hard lumber. Constant Power Technology with Soft Start maintains constant cutting speed under load and decreases start up head movement. The Integral Dust channel captures up to 75% of the dust and debris cut

The Powr-Flite 17" 1.5 hp Millennium Edition Floor Machine provides the power and versatility for the toughest jobs and features a patented rotationally molded one-piece housing that reduces the vibration and torque commonly found in other floor machines.

Steamer operates on 110V, 15 amp household current. Draws 1,500 watts. Comes with narrow and standard steam pans, 15’ steam hose, 15’ electric cord with GFCI housing and extra water gauge glass.  U.L. listed—CSA in Canada. The rate of steam coming out of the hose is 3 psi. Tank opening is 7/8” diameter.

8″ MANUAL TILE SHARK FLOOR STRIPPER

Removal of:

• Tiles(vinyl, ceramic, quarry…)
• Carpeting
• Roofing Materials
• Fireproofing
• Rubber coatings
• Waterproofing
• Linoleum
• Insulation
• Asbestos
• Mastics
• Paint build-up
• Ice

The DW745 10" Compact Job Site Table Saw with Site-Pro Modular Guarding System features tool-free guarding component adjustments and fast, accurate fence adjustments. 20" of rip capacity to handle large materials. Compact and lightweight with a metal roll cage for jobsite durability.

Features

Features:

• Electronic Pinpointing: to precisely locate target and speed recovery
• Accept/Reject Discrimination: to modify discrimination patterns
• Five Search Modes: select pre-set discrimination pattern or create your own
• Continuous Coin Depth Indicator: to determine target depth
• Battery Condition Indicator: shows battery life continually
• Interchangeable ACE series searchcoils: are available
• Expanded Target ID Legend: easy-to-read above large LCD screen
• Pushbutton Controls: with One-Touch operation

20 ton screw jack

PST models feature shaft-mounted agitators which suspend solids when pumping sand and debris. Built with ductile iron hosing for excellent wear life when pumping water with some entrapped solids.

The Ground Hog C-71-5 is two-man earth drill designed to deliver years of reliable service with superior performance. It has been a proven performer for over 40 years. It’s rugged design promotes durability and requires very little maintenance.

The HD99 is the most powerful earthdrill in the Ground Hog line. With it's 9hp Honda or Subaru engine, the HD99 can easily dig with any Ground Hog auger up to 18 inches in diameter. The use of hydraulics allows the HD99 to have variable auger speed and reverse which is very useful if the auger gets stuck. 

Pump: Belt drive triplex piston AR pump with ceramic plungers · Stainless-steel and brass Mi-T-M unloader with adjustable pressure · Forged brass manifold · Thermal relief valve · Water filter with clear sleeve for screen inspection

Pump: Direct drive triplex piston Mi-T-M pump with ceramic plungers · Stainless-steel and brass Mi-T-M unloader with adjustable pressure · Forged brass manifold · Thermal relief valve · In-line water strainer

Variable-speed dial settings from 1,400-2,000 RPM. Brush-type skirt surrounds sanding pad, preventing gouging of wall joints and aiding in dust collection. Motor located on opposite end of handle from sanding head, providing balance and control. Built-in dust collection hose.

12x18 orbital sander with dust containment. Use a white or red 12x18 scrub pad as the base to attach the sandpaper. Perfect for a light screen and recoat, parquet floors, landings, closets and decks. This sander can be hooked into a tank vacuum.

7" edge sander. Complete with carrying case and paper changing tool. Aggressive, professional results.

8" drum sander with an expandable drum. Removable handle and dust shoot makes for easy transportation. Drum lowering handle keeps the unit on a steady three point stance and delivers smooth cutting to the floor. This sander can be hooked into a tank vacuum.

The Powr-Flite P131-7 13" Floor Machine provides the power and durability for the toughest jobs in a convenient, easy to maneuver size. The P131-7 is the perfect size for stripping, scrubbing, spray buffing or bonnet cleaning areas where a regular sized floor machine won't fit.

The easy to use 461A Flooring Stapler is the fast and cost effective way to secure 1/ 4 In. to 5/8 In Engineered and Bamboo Wood Flooring, Today’s floors can present installation challenges due to the various dimensional profiles of the flooring. PNI’s commitment to provide solutions for the hardwood flooring installer is once again displayed with this easy to use Stapler that will adjust for various thicknesses and will accommodate three different lengths of fasteners. Bamboo and Engineered floors are easy to install and stay in place when stapled into proper sub floor systems. The 461A uses 1 In. to 1-9/16 In. 18 ga 1/4 In. crown staples. The 18 gauge staple provides superior holding power and its thin profile can help to prevent de-lamination of engineered flooring. The 461A’s adjustable shoe bases along with the adjustable Elevator Platform, for fine tuning the position of the staple, give you the versatility to obtain professional installation results.

• 1/2 in. capacity; 7.5 amp motor. 
• Trigger speed control in two ranges: 0-1350 rpm, 0-22,000 bpm; 0-2500 rpm, 0-40,000 bpm; reversing. 
• Hammer with rotation or rotation only . 
• Self-stop brush system

Full hammering frequency: 860 impacts/minute
Single impact energy: 50 ft-lbs
Weight according EPTA-Procedure 01/2003: 65.9 lb.